Outdoor Color Chasing 5V NeoPixel Digital RGB LED Strip Lights

Price:   $189.95  $89.95-53%

  • Model: LSC-WDLS-IP67-RGB300S
  • Shipping Weight: 0.32kg
  • 99999 Units in Stock

(0 reviews)

Please Choose:

  • Black
  • White
(complete orders today,deliverd around 14/11/2024)
  • Shipping time
    About 2-3 days.
  • means of transportation
    EMS,TNT,UPS,DHL,FEDX,HK AIR
  • Payment
    Paypal,Western Union
  • Email us
    ledstripcabinet@gmail.com
  • New Products
    NeoPixel Ring - 1 X 5050 RGB LED With Integrated Drivers
    $2.95
    NeoPixel Ring - 16 X 5050 RGB LED With Integrated Drivers
    $12.95
    NeoPixel Ring - 8 X 5050 RGB LED With Integrated Drivers
    $5.95
    NeoPixel Ring - 24 X 5050 RGB LED With Integrated Drivers
    $15.95
    • Details
    • Reviews
    • Tags
    • FAQ

    This Removable IP67 weatherproof casing LED strip Lights are even more fun and glowy. There are 300 RGB LEDs 5 meter, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of Flexible LED strip lights.

     

    You wanted twice the LEDs? We got it (well, it's 1.875 times as many but that's within a margin of error). You wanted thinner strips? Now only 12.5 mm wide, 10 mm if you remove the strip from the casing. You wanted less noticeable strip color - this strip has black-colored flex PCB, which will be less visible against black-painted walls. This is the strip with black flex PCB, it's identical to the white 60 LED/meter except it has a different color mask on the flex strip.

     

    All your dreams answered, yet there are a few things to watch for.

     

    First up, the higher density means much higher power usage over a certain distance - 18 Watts max (~3.5 Amps @ 5V) per meter instead of 9.6 Watts max (~2 Amps @ 5V). The max rating is assuming all the LEDs are on full white, usually the actual current for colorful design is about 1/3 to 1/2 the max current. 

     

    Second, to get high density, the controller chip is inside the LED, which is kind of cool, but also means that the chip only uses a single pin for input and a single pin for output. The protocol used is very very timing-specific and can only be controlled by microcontrollers with highly repeatable 100nS timing precision. We have example code for using with the Arduino Uno/Mega microcontroller at 8MHz and 16MHz, and with a little effort you can use with the Raspberry Pi, or Beagle Bone Black, but it will not work with the Basic Stamp, NETduino, any other interpreted/virtual machine microprocessor or any processor slower than 8 MHz. For those processors, check our DotStar digital LED strip lights which has SPI-like input/output and works easily with Pi, NETduino, and other processors.

     

    Third, just because you have all those pixels doesn't mean you have the RAM for it - the entire strip must be buffered in memory, and we've found many Arduino UNO projects only have about 1500 bytes of RAM available after all the extras are included - enough for about 500 LED pixels. If you want to drive the entire strip and have some other libraries included, use a Mega.
    These LED strips are even more fun and glowy. There are 60 RGB LEDs per meter, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip. Only 1 digital output pin are required to send data down. The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.

     

    The strip is made of flexible PCB material, and comes with a weatherproof sheathing. You can cut this stuff pretty easily with wire cutters, there are cut-lines every 0.65"/1.7cm (1 LED each). Solder to the 0.1" copper pads and you're good to go. Of course, you can also connect strips together to make them longer, just watch how much current you need! We have a 5V/10A supply that should be able to drive 5 meter (depending on use) You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip.

     

    Electrical&Optical Data 

    Beam Angle 120 degree Type Flexible Light Strips
    Max Run 3 IP Rating Weatherproof IP67
    LED Lifetime 50000 Hours Number of LEDs in Unit 300 LEDs
    Ambient Temperature -20ºc - 45ºc Strip Width 12.5mm (0.5")
    LED Type 5050 SMD Connection Type Pigtail
    Total Length 196.9in (16.40ft) LED Color RGB
    Thick with casing 4mm (0.16") Package Weight 0.32kg
    Voltage(V DC) 5 Volt Special Features High CRI
    Standards And Certifications CE/RoHS Compliant/UL Listed LED wavelengths 630nm/530nm/475nm
    Humidity 40% - 70% RH Warranty 5 Year
    1 integrated RGB LEDs per segment, individually controllable
    12.5mm (0.5") wide, 4mm (0.16") thick with casing on, 1.85mm (0.07") thick without casing, 16.7mm (0.65") long per segment

     

    Maximum Flexibility Precaution

    Led High Bay Light