Color Chasing 5V NeoPixel Digital RGB LED Strip Lights - 150LEDs

Price:   $89.95  $59.95-33%

  • Model: LSC-NDLS-RGB150S
  • Shipping Weight: 0.15kg
  • 99999 Units in Stock

(0 reviews)

Please Choose:

  • Black
  • White
(complete orders today,deliverd around 18/10/2019)
  • Shipping time
    About 2-3 days.
  • means of transportation
  • Payment
    Paypal,Western Union
  • Email us
  • New Products
    Pigtail CPS Power Adapter Cable
    Under Cabinet LED Lights Kit-Kitchen Counter Light,380 Lumens/ft
    $96.95  $79.95-18%
    8mm Flexible Light Strip CPS Adapter Cable Clamp
    2 Contact 10mm Flexible LED Strip Adapter Cable - CPS to Clamp
    • Details
    • Reviews
    • Tags
    • FAQ

    There are 150 RGB LEDs 5 meter, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of Flexible LED strip lights.


    This NeoPixel flexible LED light strip have 30 digitally-addressable pixel LEDs per meter and are very affordable and are only 10 mm wide,5V DC operation. This is the strip with black flex PCB, its identical to the white 30 LED/meter except it has a different color mask on the flex strip.


    There are a few things to watch for.


    First up, These LED's use about 9.5 Watts max (~2 Amps @ 5V) per meter. The max rating is assuming all the LEDs are on full white, usually the actual current for colorful design is about 1/3 to 1/2 the max current. A good power supply such as our 5V 10A supply is key!


    Second, to get high density, the controller chip is inside the LED, which is kind of cool, but also means that the chip only uses a single pin for input and a single pin for output. The protocol used is very very timing-specific and can only be controlled by microcontrollers with highly repeatable 100nS timing precision. We have example code for using with the Arduino Uno/Mega microcontroller at 8MHz and 16MHz, and with a little effort you can use with the Raspberry Pi, or Beagle Bone Black, but it will not work with the Basic Stamp, NETduino, any other interpreted/virtual machine microprocessor or any processor slower than 8 MHz. For those processors, check our DotStar digital LED strip which has SPI-like input/output and works easily with Pi, NETduino, and other processors.

    The way the pixels are controlled by an Arduino, the entire strip must be buffered in memory, and we've found many Arduino UNO projects only have about a 1500bytes of RAM available after all the extras are included - enough for about 500 LED pixels. If you want to drive the entire strip and have some other libraries included, you may need to use a Mega.

    There are 30 RGB LEDs per meter, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip. Only 1 digital output pin are required to send data down. The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you


    The strip is made of flexible PCB material, You can cut this stuff pretty easily with wire cutters, there are cut-lines every 1.3"/3.4cm (1 LED each). Solder to the 0.1" copper pads and you're good to go. Of course, you can also connect strips together to make them longer, just watch how much current you need! We have a 5V/10A supply that should be able to drive 10 meters (depending on use) You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire LED strip.


    Electrical&Optical Data 

    Beam Angle 120 degree Type Flexible Light Strips
    Max Run 3 IP Rating Non-Weatherproof
    LED Lifetime 50000 Hours Number of LEDs in Unit 150 LEDs
    Ambient Temperature -20ºc - 45ºc Strip Width 10mm / 0.39"
    LED Type 5050 SMD Connection Type Pigtail
    Total Length 196.9in (16.40ft) LED Color RGB
    Strip Thickness 1.85mm (0.07") Package Weight:  0.21kg
    Voltage(V DC) 5 Volt Special Features High CRI
    Standards And Certifications CE/RoHS Compliant/UL Listed LED wavelengths 630nm/530nm/475nm
    Humidity 40% - 70% RH Warranty 5 Year
    1 integrated RGB LEDs per segment, individually controllable
    10mm (0.39") wide, 4mm (0.16") thick with casing on, 1.85mm (0.07") thick without casing, 33mm (1.3") long per segment


    Maximum Flexibility Precaution

    Similar Products
    Led High Bay Light