NeoPixel Ring-1 X 5050 RGBW LED W/Integrated Drivers,Warm White ~ 3500K

Price:   $3.95

  • Model: LSC-1xRGBW-5V
  • Shipping Weight: 0.002kg
  • 99999 Units in Stock

(0 reviews)

Please Choose:

  • Black
  • White
  • With LC3 locking connectors
  • Without LC3 locking connectors
(complete orders today,deliverd around 14/11/2024)
  • Shipping time
    About 2-3 days.
  • means of transportation
    EMS,TNT,UPS,DHL,FEDX,HK AIR
  • Payment
    Paypal,Western Union
  • Email us
    ledstripcabinet@gmail.com
  • New Products
    5m RGB+CCT LED Strip Light - Color-Changing LED Tape Light - 12V / 24V - IP20 - RGB+CCT - 196.9in (16.40ft)
    $98.99
    5m RGBW LED Strip Light - 4-in-1 Chip 5050 Color-Changing LED Tape Light - 12V / 24V - IP20
    $89.99
    5m RGB+W LED Strip Light - Color-Changing LED Tape Light - 12V / 24V - IP64 Weatherproof - 3000K / 4000K / 6500K - 196.9in (16.40ft)
    $98.99
    5m RGB LED Strip Light - Color-Changing LED Tape Light - 12V / 24V - IP20
    $41.99
    • Details
    • Reviews
    • Tags
    • FAQ

    What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixel rings now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Round and round and round they go!  

     

    This is the 1 LED RGBW NeoPixel in Warm White. We have a ton of other NeoPixel rings in the store to check out!

     

    1 ultra bright smart LED NeoPixels are arranged in a circle with 12mm (0.48") outer diameter. The rings are 'chainable' - connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim. Power the whole thing with 5VDC and you're ready to rock.

     

    The NeoPixel is 'split', one half is the RGB you know and love, the other half is a white LED with a yellow phosphor. Unlit, it resembles an egg yolk. Lit up these are insanely bright (like ow my eye hurts) and can be controlled with 8-bit PWM per channel (8 x 4 channels = 32-bit color overall). Great for adding lots of colorful + white dots to your project!

     

    NeoPixel LEDs use 800 KHz protocol so specific timing is required. On NeoPixels, the PWM rate is ~400 Hz, which works well but is noticable if the LED is moving. In comparison, DotStars have a 20 KHz PWM rate, so even when moving the LED around, you won't see the pixelation, the blending is very smooth. (we recommend DotStars if you can use them)

     

    NeoPixels are 5050-sized LEDs with an embedded microcontroller inside the LED. You can set the brightness and color of each R/G/B/W with 8-bit PWM precision (so 32-bit color per pixel). The LEDs are controlled by shift-registers and only 1 digital output pin are required to send data down. The PWM is built into each LED-chip so once you set the color you can stop talking to the ring and it will continue to PWM all the LEDs for you.


    Comes as a single ring with 1 individually addressable RGBW LEDs assembled and tested.

     

    Click here to buyLC3 locking connectors

     

    Electrical&Optical Data 

    Beam Angle 120 degree Type NeoPixel Ring
    LED Color RGB + Warm White(3500k) IP Rating Non-Weatherproof
    LED Lifetime 30000 Hours LED quantity 1 LEDs
    Connection Type Pigtail PCB Width 8mm (0.31in)
    diameter 12mm Operating Voltage Range 5 VDC
    LED Type 5050 SMD Thickness 3mm
    May ship with either WS2812B or SK6812-based LEDs. They are the same brightness, color and protocol

    Led High Bay Light